Windows 2000

Installation:
-------------
  Before starting with the installation process, make sure that the 
  adapter is properly installed and configured.

   1.If Windows 2000 has built the driver, when you plug the
     adapter in the mother board and power on the Windows 2000, the
     Window 2000 will install the driver automatically.

     You will see there is an item:
     
        "Realtek RTL8139(A) PCI Fast Ethernet Adapter"

     in the 'Network adapters' list in the Device Manager.

     The Device Manager can be invoked by choosing Start\Settings\
     Control Panel\System\Hardware(Tag)\Device Manager...(Button)

     We recommend you to install the updated driver from the distributing 
     disk by performing step 3 ~ 10.

   2.If Windows 2000 has not built the driver, obey step 5 ~ 10 to
     install the driver.

   3.Invoke the Network adapters. Right click the item

         "Realtek RTL8139(A) PCI Fast Ethernet Adapter"

     and choose Properties. There will prompt the 
     'Realtek RTL8139(A) PCI Fast Ethernet Adapter Properties' window.

   4.Click the Driver tag, and choose the 'Update Driver' button.
     There will prompt a 'Upgrade Device Driver Wizard' window.
     Click 'Next'.

   5.The Wizard will ask you
     What do you want the wizard to do?
     Please choose
     'Display a list of the known drivers for this device so that I can 
      choose a specific driver'.
     Click 'Next', it will prompt a 'Select Network Adapter' window.

   6.Click 'Have Disk...'.
     In 'Install From Disk' window, type the following path in the combo 
     list:
           EX: A:\WIN2K

     Click 'OK'.

   7.There will show

      "TRENDnet TE100-PCIWA/TE100-PCIWN 10/100Mbps PCI Fast Ethernet Card"

     in the 'Network Adapter:' field. Click 'Next'.

   8.There will show

      "TRENDnet TE100-PCIWA/TE100-PCIWN 10/100Mbps PCI Fast Ethernet Card"

     in 'Start Device Driver Installation' window. Click 'Next'.

   9.Windows 2000 will copy the driver and system files for the network.
     If there prompts a 'Digital Signature Not Found window', please 
     click 'Yes' to continue the installation.

  10.Then click 'Finish' to complete the installation.